Arquivo de Produtos - Norleq

PMA 5 – Pensky-Martens Flash Point Tester

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

PMA 5 is an automatic model that is easy to operate.

It works with its cup closed and its movable head allows an easier access to all PMA 5 sensors and ignition systems.
Memory for 1000 tests
2 ignition systems
Built-in sensor for barometric pressure
Automatically lights test flame and relights if necessary
Multidetector for detection and temperature measurement
Respects ASTM D93 norm

O conteúdo PMA 5 – Pensky-Martens Flash Point Tester aparece primeiro em Norleq.

ADU 5 – Automatic Distillation Unit

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

ADU 5 is an autonomous unit, automatically operated through an incorporated monitor. This unit operates at air pressure, according to ASTM D86 (group 0, 1 ,2, 3 and 4), ASTM D1078, ASTM D850, ISO 3405, IP 123 and IP 195 norms. Its method determines oil products characteristics between 0ºC and 400ºC. This products include light and intermidiate distillates, gasoline with or without oxygenates, aviation and navy fuel, diesel fuel, biodiesel mixes with less than 20%, white spirits and special oil spirits.

This unit includes a detillation optimisation program, which creates individual heating curves and allows a precise control over destillation speed.

O conteúdo ADU 5 – Automatic Distillation Unit aparece primeiro em Norleq.

V-700 Spectrophotometers

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

Jasco raplaced V-600 Spectrophotometers with their brand new V-700 series. For each new Spectrophotometers, please check the improvements below:

[toggle title=” V-730 replaces V-630″ ]

Spectral bandwidth: 1.0 nm
Photometric range: -3 to 3 Abs
Photometric accuracy (Tested with NIST SRM 930): ±0.0015 Abs (0 to 0.5 Abs) ±0.0025 Abs (0.5 to 1 Abs) ±0.3 %T
RMS noise: 0.00004 Abs
Baseline flatness: ±0.0005 Abs (200 ~ 1000nm)[/toggle]

[toggle title=” V-750 replaces V-650″ ]

Photometric range: -4 to 4 Abs
Photometric accuracy (Tested with NIST SRM 930): ±0.0015 Abs (0 to 0.5 Abs) ±0.0025 Abs (0.5 to 1 Abs) ±0.3 %T
Baseline flatness: ±0.0002 Abs (200 ~ 850nm)[/toggle]

[toggle title=”V-760 replaces V-660″ ]

Photometric range: -4 to 6 Abs
Photometric accuracy (Tested with NIST SRM 930): ±0.0015 Abs (0 to 0.5 Abs) ±0.0025 Abs (0.5 to 1 Abs) ±0.3 %T
RMS noise: 0.00003 Abs
Baseline flatness: ±0.0003 Abs (200 ~ 800nm)[/toggle]

[toggle title=”V-770 replaces V-670″ ]

Photometric range: UV-Vis: -4 to 4 Abs – NIR: -3 to 3 Abs
Photometric accuracy (Tested with NIST SRM 930): ±0.0015 Abs (0 to 0.5 Abs) ±0.0025 Abs (0.5 to 1 Abs) ±0.3 %T
Baseline flatness: ±0.0002 Abs (200 ~ 2500nm)[/toggle]

O conteúdo V-700 Spectrophotometers aparece primeiro em Norleq.

USP Dissolution 4 – flow-through cell

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

O conteúdo USP Dissolution 4 – flow-through cell aparece primeiro em Norleq.

Penetrometer PNR-12

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

Penetration is used to measure the resistance that a material exerts, under specified test conditions by drilling a needle in a specific manner. In addition to the configuration used, importance is also given to factors such as temperature, time, and load placed on the test sample specified in the method that supports the test.

The PNR-12 unit is a unit that allows automatic detection of surfaces, positioning the needle automatically and manually, easy handling with a jog-shuttle driven menu (turn & push) and interactive operator interface.

PNR 12 allows automatic measurement in electrically conductive samples, as well as non-conductive samples with a proprietary force sensor (optional). This option detects the surface of non-conductive samples even under a layer of water, initiates the sequence of desired tests and reports the results automatically.Standards:ASTM D5, ASTM D217, ASTM D937, ASTM D1321, ASTM D1403, ASTM D2884, ASTM D7342, ISO 2137, ISO 6873, DIN 51579, DIN 51580, EN 1426, EN 13179-2, EN 13880-2, IP 49, IP 50, IP 179, IP 310, IP 376, JIS K 2207, JIS K 2235, AASHTO T49, AOSC Cc 16-60, European Pharmacopoeia 2.9.9., Miscellaneous Standards

O conteúdo Penetrometer PNR-12 aparece primeiro em Norleq.

DisiTest 50 – Automatic tablet disintegration tester

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

The DisiTest 50 is a modular disintegration testing system to automatically measure disintegration time of tablets and capsules in full compliance with current Pharmacopeia. Innovative induction heating technology reduces heating times to only 3-5 minutes and completely eliminates unproductive cleaning times typically associated with conventional water bath based systems. Whether used as single station tester or modular disintegration testing system with up to 4 independent stations, the DisiTest 50 guarantees maximum efficiency and consistent results.

O conteúdo DisiTest 50 – Automatic tablet disintegration tester aparece primeiro em Norleq.

OCA 15 EC – optical contact angle measuring instrument

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

Whether your application demands the evaluation of contact angle or drop shape, the video-based optical contact angle measuring system, OCA 15EC, is the instrument of choice where initial budgets are limited. The single direct dosing system, SD-DM, together with the electronic dosing unit, ES (both included within the ‘system’ configured, under the OCA 15EC part number) enable the precise and accurate handling and dosing of liquids.The OCA 15EC can be easily broken down for transportation in the optional case, TBO.

Features of the featured instrument configuration:

The horizontal position of the sample table (in the plane of the optical path) is manually adjustable via our magnetic slide system. Movement in the vertical (Z-azis) direction can be achieved via precise adjustment of the hand wheel.
High performance 6x parfocal zoom lens, with integrated continuous fine focus, and adjustable observation and camera tilt angle.
Video measuring system with USB camera (max. 87 images/s sample rate).
Lighting of the optical path, with adjustable intensity without hysteresis.
Single direct dosing system, SD-DM, for use with standard and disposable syringes and needles.
One electronic dosing unit, ES, with software controlled adjustable dosing volume (min. 50 nl) and dosing rate (0.06 µl/s … 26.4 µl/s).

Access to many of the available OCA accessories.

Some of the most important components and accessories are listed below:

High-speed option for USB camera (max. 311 images/s sample rate).
Manual tilting base attachment, TBA 60M, for a maximum tilt angle of 70°.
Wide range of sample securing and positioning. Inc. units for foils or papers, FSH 30 and FSC 80/150, or the suction plate, SP 100, for holding thin flexible samples flat on the stage, with an adjustable suction area.
Electro wetting platform, EWP 100, for the analysis of sessile and pendant drops under a definable electrical field
The available software modules for the OCA 15EC are:
SCA 20 — contact angle
SCA 21 — surface free energy
SCA 22 — pendant drop
SCA 23 — lamella contour

O conteúdo OCA 15 EC – optical contact angle measuring instrument aparece primeiro em Norleq.

Colorimetric process analyzer (DPD-method)

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

Colorimetric process analyzer (DPD-method) for measurement and dosing control of disinfectants such as free chlorine, monochloramine, total residual chlorine and combined chlorine.

For the continuous online determination of disinfectants based on the DPD colorimetric method (EN ISO 7393-2; APHA 4500-Cl G).
Measurement values : free chlorine, monochloramine, total residual chlorine, combined chlorine, flow and if installed pH and temperature.
Complete system including measurement and control electronics, photometer, flow indicator, reaction chamber, reagent dosing system and reagent containers.
Integrated pH measurement with temperature compensation (available as option).
All usual dosing devices for disinfectants and pH control can be connected either through relays or analog output signals. Two independent controllers can operate simultaneously.

Separate chemical cleaning module available as accessory.

O conteúdo Colorimetric process analyzer (DPD-method) aparece primeiro em Norleq.

Centrifuge model CR 2000

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

Centrifuge Series 2 with operating range between 500 and 12000 rpm and 13,500 G’s maximum. Capacity for 4 * 100 ml. Blue LED display, automatic rotor recognition, memory for different programs, quiet operation with brushless motor.

O conteúdo Centrifuge model CR 2000 aparece primeiro em Norleq.

J1000 – Circular dichroism equipment

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

The J-1000 series comprises two equipments directed to two different segments of the market, the model J-1100 suitable for conventional applications and model J-1500 with a range of wavelengths with a bigger wl range for operation from UV to NIR. Both units allow simultaneous measurements of CD and LD in addition to various types of thermostatted accessories . The model J-1500 has a purge system more efficient than previous models, allowing a significantly more efficient and faster purge. The units include mercury lamp for validation of the system, automatic recognition system, fittings and a cutter for the light beam coming from the xenon lamp to monochromator to prevent degradation of this when not in use.

O conteúdo J1000 – Circular dichroism equipment aparece primeiro em Norleq.

EXP Guard Cartridge Column

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

High Pressure resistance rated to 100 MPa (15,000 psi);
Low-volume, low-dispersion cartridges minimize the impact on separation;
Zero-dead-volume direct connection to column;
Compatible with various column connection types;
Hand-tight guard replacement: No tool needed;
Ideal for protecting Triart 1.9 microns analytical column;

O conteúdo EXP Guard Cartridge Column aparece primeiro em Norleq.

Dissolution according to USP IV

Samsys — Fri, 22 Oct 2021 10:52:18 +0000

For over 30 years, SOTAX has been developing USP Apparatus 4 Flow Through Cell Dissolution with experts in academia and industry. Today, SOTAX is a worldwide market leader with expertise in method development and feasibility studies, automated sampling, on-line real time analysis, and customized solutions for unique drug delivery systems.

The CE 7smart is the fourth generation of SOTAX flow-through cell systems and has been designed as the Apparatus 4 instrument made to overcome potential challenges linked to method development for a variety of dosage forms.

With the Flow-Through Cell, fresh media passes continuously across the dosage form. This is called an open loop system. A semi-automated system allows samples to be taken simultaneously and collected in a fraction collector or analyzed directly by UV. Complete fractions or aliquotes can be collected in an Off-line open system. It is also possible to collect samples and analyze them.

USP 4 Fixed and Small Volume Dissolution/Elution Testing…For small or fixed volume testing, the flow through cell can re-circulate the media across the dosage form. This is called a closed loop system. This can be an on-line closed loop with UV, micro volume autosampler, and even a manual sampling syringe.

The validation of the USP 4 Dissolution Testing system according to the regulations can be done by a SOTAX specially trained service engineer. The USP requires the flow rate and temperature to be qualified.

O conteúdo Dissolution according to USP IV aparece primeiro em Norleq.